• Home
• Products
• Contact Us
• Quotes
• What's New
• Parts Sheet/Instructions
• About Us
• Links/Shows
• Clearance

CLICK HERE for Printable Version of this page.

Type MSL --- Metal Slitting Saws
Used for deep-slotting of Steel and Cast Iron --- also cast Brass and Aluminum and similar hard non-ferrous metals.  Has a stronger tooth and gives a better finish with less bur.

M-2 High Speed Steel

Hollow Ground
For Side
Clearance

Ground Land

Rake Angle
of Teeth: 0°

Ground Teeth

Metric Sizes Available

Tolerances:
O.D. = ±.005
Thickness = ±.0005
I.D. = +.001 -.000
(Closer tolerances
available at
additional cost.)

NOTE:
     Saws in schedule are stocked for immediate shipment, Intermediate thickness, use next higher price in schedule (plus a slight grinding charge for smaller quantities).
     We'll gladly quote on other sizes, rake angles, tooth styles, hole sizes, etc. --- just send us your print or sample saw.
     Teeth can be alternately beveled if chips tend to stick in slot

RESHARPENING SERVICE
Complete resharpening
service is available.

COATING SERVICE
TiN, TiCN and other surface
coatings are available.

STOCK SAWS

Thickness

O.D.

2-1/2"

3"

4"

5"

6"

Fraction

Hole

7/8"

1"

1"

1"

1"

No. of
Teeth

28

30

36

44

50

3/16"

.1875"

5/32"

.1562"

OMSLD1562

1/8"

.1250"

OMSLH1250

OMSLD1250

3/32"

.0937"

1/16"

.0625"

3/64"

.0468"

1/32"

.0312"

Ground Teeth

M-2 High Speed Steel

Hollow Ground For Side Clearance

Rake Angle of Teeth: 0°

Metric Sizes Available

Type SS Screw
Slotting Saws
Used for Cutting-off, slitting
and slotting of Steel
(Similar to slots in screw heads).

NOTE:
     Saws in schedule are stocked for immediate shipment.  For thicknesses not shown, use next higher price in schedule (plus a slight grinding charge for smaller quantities).
     Other diameters from 1/4" to 6" are also available, as well as other hole sizes, numbers of teeth, rake angles and bevels.
     Cutting Stainless Steel requires more side clearance - specify "for Stainless" when ordering.

Tolerances: O.D. ± .005; Thickness ± .001;
I.D. +.001 - .000
Closer tolerances available at additional cost.