Electric Motor Repair Electric Motor Maintenance-Martindale Products
Española
Français
sales@martindaleco.com
phone:  216-521-8567
fax:       216-521-9476
Site Search:
 


Undercutters



Hand Held Models:

Close-Cut: Electric, Compact - Self Contained
            Uses 3/8" or 7/16" O.D. saws with 1/8" arbor

Imperial:
        Air or Electric
            Uses 7/8" or 1" O.D. saws with 9/32" arbor

Universal: Flex-Drive, Electric
            Uses 1/2" O.D.  saws with 3/16" arbor

Mica Millers:

            All three models have a choice of three interchangeable heads:
                   Small Head uses 23/32" or 3/4" O.D. saws with 5/16" arbor.
                   Standard Head uses 7/8", 1" or 25mm O.D. saws with 5/16" or
                       7mm arbor. 
                   Heavy-Duty Head uses 1-1/8" or 1-1/4" O.D. with 3/8" arbor
       
Air-Driven
        Flex-Driven, Electric
        Model K, Self Contained Electric
       
Interchangeable Heads, Saws & Carrying Case for above
Kut-Kwiks: Air-Driven
            Uses 3/4" or 7/8" O.D. Saws or Diamond Wheels with 5/16" arbor.

          4,000 R.P.M. for use with H.S.S. Saws
          5,300 R.P.M. for use with Tungsten-Carbide Saws
        20,000 R.P.M. for use with Diamond Wheels

        35,000 R.P.M. (Mini Kut-Kwik) for use with Diamond Wheels
Kut-Kwik: Electric
            Uses 3/4" or 7/8" O.D. Saws or Diamond Wheels with 5/16" arbor.

          18,000 R.P.M. for use with Diamond Wheels

Jiff-V: Electric, Reciprocating
            Uses Jiff-V Files or Jiff-U Saws

Bench Models:
Utility:
            Handles armatures up to 9" diameter and commutators
            1" to 6" diameter. Maximum distance between supports is 22".

HV-3:
            Handles armatures up to 12" diameter and commutators 6-1/2"
            diameter x 6-1/2" long.  Maximum distance between supports is 23".

H-9: Heavy-Duty
            Comes with bench.  Handles armatures and commutators up to 17"
            diameter.  Maximum distance between supports is 35".

Floor Model:
HA-2:
            Handles armatures up to 44" diameter. Handles commutators 10" to 44"

            diameter x 21" long. Maximum distance between supports is 58". Longer
            lengths available.

Lathe Mounted Models:
Lathe-Type
            Two spindles furnished. Uses 1/2" O.D. saws with 3/16" arbor or 7/8" O.D.
            saws with 5/16" arbor. When used with Slide Carriage, maximum slide
            travel is 11".

Super Lathe-Type
            Choice of two spindles. Uses either 7/8" O.D. saws with 5/16" arbor or
            1-1/8" O.D. saws with 3/8" arbor.

 
     
Home | Metal Working Mica Saws | Rotary Burs | Undercutters | Abrasives | Commutator Grinders | Electrical Test Equipment | Electrician's Hand Tools | Other Products